• (+358)45 6754806
  • info@cncpaja.com
  • Espoo, Finland

Partners and Contributors


CNC PARTS LIST

This page contains information of partners and contributors that have joined the CNC build project that i started in the beginning of year 2021. Below you will find a list about all parts that the CNC frame consists of and also some accessories that are not mandatory for the CNC project.

*(AE) = AliExpress
*Prices includes shipping and possible taxes.

Total Price (Laser and accessories not included in total price):
~2900€
Total Price (Only frame without electronics and tools):
~1950€

Laser
Opt Lasers PLH3D-6W-XF (Check the Link)
Opt Lasers uSpot lens (Check the Link)
Opt Lasers High pressure air-assist nozzle (Check the Link)

Router
Makita RT0700 (~180€)

Aluminum CNC base frame
RatRig (~165€ or ~47€/m)

CNC bottom frame
4x 2080 profiles 1500mm (37,50€ x4 = 150€)
4x 40×40 T Joining plate (11€ x4 = 44€)
4x 40×40 90 Joining plate (11€ x4 = 44€)
Cast Corner Bracket – Large (1,50€ x32 = 48€)
Low Profile Screws M5 8mm (0,25€ x64 = 16€)
Low Profile Screws M5 10mm (0,25€ x96 = 24€)
Tee Nuts (T-nuts) M5 (0,20€ x160 = 32€)
30mm thick rubber gasket/plate 12€

Incra rails (8x 23,50€ / 920mm = ~185€)
Pine shelf plates (5x 7,20€ = ~36€)

CNC Enclosure
Easy-Systems BSB 3030 profile (9x 1300mm 84€, 8x 1000mm 60€)
30 3D Cube connectors (10x ~48€)
90 degree Angle set (kit) (16x ~48€)
3x1000x1500 Clear Polycarbonate glass from IKH (5x 65€ = 325€)

Gantry and End plates
Al-Men 200x20mm Aluminum Plates ~1400mm (~160€ or ~110€/950mm)
Al-Men 150x10mm Aluminum Plates ~1700mm (~105€ or ~57€/950mm)

T-Slot Nuts (40S & 45S)
CNCCANEN (AE) (~50€ for 60pcs + 60pcs)

Linear Rails and Ballscrews sets. (Shipped from Czech Republic)
HGR15 300-350mm set (Z axis ~75€)
HGR20 1000-1050mm set (X & Y Axis ~400€)

Closed Loop hybrid steppers
ihss57-36-20 (AE) (4x motors ~300€)
HM12-57 C5 Nema23 bearing mounts (4x ~130€)

Power Supply
48VDC 1500W (~80€)

Electric supplies
Motonet -> Wires (black and red) 10×2 meters, fuse box, abiko connectors. 5A fuses. (~35€)

Controller
Planet-CNC MK3/4 + license (145€ + 85€)

Shaft Couplers
8pcs 8x10mm (25€)

Grease press/gun
One hand Grease gun (18€)
Flexible hose 300mm (11€)
Mini grease gun (16€)
Bearing grease (~6€)

Accessories

Thermal Sensors and development kit
M5Stack Basic Core (~30€)
M5Stack Unit MLX90640 Sensor (~90€)