Build Project
![Making of the X-axis gantry plate prototype. Making of the X-axis gantry plate prototype.](http://cncpaja.com/wp-content/uploads/2021/03/IMG_1704-1024x682.jpg)
Making of the X-axis gantry plate prototype.
Not much to say here more than -> check the video below
Feedrate 600mm/min and plunge rate for rail holes was 50mm/min since there was an error in the gcode…
A 3mm diamond multitoothed bit with 1/8″ or 3.175mm shank was used.
CncPaja
0
Tags :